Curil K2
The non-curing, temperature-resistant sealing compound.
Temperature stability: -40°C to +200°C.
In engine maintenance many sealed joints are required above all else to be easily separable or disassembled. Curil K2 meets this requirement: It does not cure. Curil K2’s low viscosity makes it ideal for sealing finely finished and super finished components whose prescribed tolerances are not allowed to be changed. Joints sealed with Curil K2 remain leak proof under mechanical, chemical and thermal loads and yet are still easy to separate. These special advantages mean that Curil K2 can be used for joints between identical or different metals, threaded seals, etc. Curil K2 is resistant to mineral oils (also with additives), greases, hot and cold water, seawater, gases and air. 125ml Bottle.
Application:
Clean and degrease the sealing surfaces. Apply Curil K2 and leave for 5 – 10 minutes before fitting the parts together.
At WR we use Curil K2 for sealing anything that uses a gasket.